Stepper Motor Magnetization: How Does Multi-Pole Magnetization Ensure Stepper Positioning Accuracy?
End-to-End Solution for Magnetization Automation
Automated Magnetic Charging Integrated Solution
Stepper motors rely on stator windings to sequentially switch the magnetic field and drive the rotor to rotate step by step; positioning accuracy is directly affected by the quality of multi-pole magnetization of the magnets. The magnets used in such motors have many poles and small pole pitch, so the direction and strength of each pole must be accurate during magnetization — otherwise the step angle error increases and positioning drifts.

The more poles there are, the higher the magnetization difficulty. Adjacent magnetic pole directions alternate and the pole pitch is small, so requirements for coil positioning and leakage flux control are higher; if a pole is mis-magnetized or not fully saturated, torque fluctuation arises, especially noticeable at low speed — the equipment vibrates and accuracy drops.

Multi-pole magnetization to ensure accuracy hinges on high-precision fixtures and stable parameters. Magnetization coils are specially designed according to pole pitch, combined with mechanical positioning to ensure repeat placement; each batch is calibrated with a standard sample to monitor the magnetic flux mean of each pole and the inter-pole deviation.

In practice, first determine the saturation parameter for each pole, then magnetize in pole sequence to avoid adjacent pole interference. After magnetization, measure the surface field strength of each pole and select groups with good consistency. JiuJu Automation's stepper motor magnet magnetization equipment adopts modular multi-pole coils — only the coil module is changed during model changeover, not the main unit — delivering stable repeat positioning. For high-precision positioning scenarios, JiuJu Automation generally recommends establishing a per-batch magnetic pole spot-check archive and using statistical methods to control whole-batch fluctuation, which is more reliable than individual piece inspection.
Magnetization of Magnetic Materials
3C Electronic Magnetization
Motor Rotor Magnetization
Car Speaker Magnetization
New Energy Vehicle Industry
Medical Equipment Industry
Other Industries
Jiu Ju Magnetizer



























