Video on the Wiring Procedure for a 3000V General-Purpose Industrial Magnetizer—Jiuju Magnetizer

End-to-End Solution for Magnetization Automation

Automated Magnetic Charging Integrated Solution

Magnetizing Equipment

Magnetization Automation

Magnet Measuring Instruments

Magnetization Services

Before proceeding, be sure to disconnect the equipment from the main power source and confirm that the unit is completely de-energized to prevent any live wiring work. First, inspect the power cord and connection cables to ensure there is no visible damage or wear, and that the connectors are free of debris and dirt. Connect the power supply line, magnetizing coil line, and control line in sequence according to the corresponding ports indicated on the equipment. Ensure that the plugs are securely locked into place, and that the wires are neatly arranged without being pinched or tangled. After completing the wiring, double-check each connection to verify that the wiring sequence is correct and that all connections are secure. Check that there are no conductive foreign objects in the surrounding area and confirm that the wiring area is safe and free of hazards. Then, turn on the power switch to perform a test run. Observe whether there are any unusual noises or abnormalities while the equipment is powered on. Once normal operation is confirmed, the equipment may be put into service. After completion, organize the wiring and document the operational verification.

Wiring Operation Procedure for the Magnetizer

Magnetization of Magnetic Materials

3C Electronic Magnetization

Motor Rotor Magnetization

Car Speaker Magnetization

New Energy Vehicle Industry

Medical Equipment Industry

久巨异形衫钴磁铁充磁工艺案例视频—久巨充磁机

2026年9月12日

异形钐钴磁铁外形不规则，磁极排布复杂，加之钐钴材料耐高温、矫顽力高，充磁时极易出现磁场不均、偏充等问题，对工装与工艺参数要求较高。

烧结钕铁硼磁环充磁工艺案例视频—久巨充磁机

2026年9月11日

烧结钕铁硼磁环广泛应用于电机、传感器等精密设备，多极充磁对磁场均匀度、磁极定位精度要求严苛。

久巨衫钴磁铁如何获得稳定磁性充磁案例视频—久巨充磁机

2026年9月9日

钐钴磁铁凭借高矫顽力、耐高温的特性，广泛应用于高温精密工况，稳定均匀的磁性输出是其核心性能保障。

Video on Automatic Magnet Magnetization—Jiuju Magnetizer

August 17, 2026

Magnetization itself is a physical process that takes place in milliseconds; what truly slows down the overall production cycle are the manual loading, unloading, and alignment and calibration steps. In manual magnetization mode, workers must pick up and place each part individually and verify the polarity direction, which takes several seconds per part. Production capacity fluctuates significantly depending on the workers’ skill level and fatigue, and the strong magnetic field environment also poses safety hazards.