Magnetization of Electric Motors in New Energy Vehicles: Why Are the Precision Requirements Far Higher Than Those for Conventional Motors?
End-to-End Solution for Magnetization Automation
Automated Magnetic Charging Integrated Solution
The magnetization accuracy requirements for drive motors in new energy vehicles are 3 to 5 times higher than those for traditional industrial motors. This is driven by three hard constraints on vehicle performance.
The first constraint is motor efficiency. Driving range depends directly on the energy efficiency of the drive motor; deviations in the uniformity of the permanent magnet’s magnetic flux translate into torque ripple and increased iron losses. Industry testing has shown that optimizing magnetic flux deviation from ±21 TP3T to ±11 TP3T can improve the motor’s peak efficiency by approximately 0.8 percentage points, which translates to a 3–5 kilometer increase in the vehicle’s total range. Jiuju Automation’s experience in the field of magnetization for new energy motors shows that using multi-pole integrated magnetization combined with a closed-loop online magnetic flux detection system can stably control inter-pole deviation within ±0.81 TP3T.

The second constraint is NVH performance. Passenger cars are extremely sensitive to noise levels, and the drive motor is the primary source of electromagnetic noise. Uneven magnetization of the permanent magnets generates additional radial electromagnetic force harmonics, which can excite resonance at specific rotational speeds. The multi-pole integrated magnetization solution controls the magnetic flux deviation of each pole to within ±11 TP3T in a single step, suppressing electromagnetic noise at its source.

The third constraint is the reliability of heat dissipation. Insufficient magnetization accuracy leads to inconsistent local magnetic saturation, causing abnormally high eddy current losses in certain areas and forming local hot spots, which accelerate the aging of the winding insulation during long-term operation. To meet these requirements, magnetizing equipment must achieve a voltage output accuracy of ≤±0.5% and a coil magnetic field uniformity of ≥95%. Currently, JiuJu Automation’s magnetizing equipment is being used in mass production on multiple new energy motor production lines, covering the multipole integrated magnetization process for drive motor rotors.
Magnetization of Magnetic Materials
3C Electronic Magnetization
Motor Rotor Magnetization
Car Speaker Magnetization
New Energy Vehicle Industry
Medical Equipment Industry
Other Industries
Jiu Ju Magnetizer



























