Full Site Search

JiuJu Magnetism Industry News] Shanghai Rare Earth Association's Fourth Third Expanded Council Meeting Successfully Held

End-to-End Solution for Magnetization Automation

On the afternoon of December 19, 2025, the third enlarged meeting of the fourth council of Shanghai Rare Earth Association was held on schedule in the conference room of Shaw Building of East China University of Science and Technology. The meeting was chaired by Rao Xiaolei, President of the Association, and attended by Guo Changfa, fourth grade researcher of the New Materials Division of Shanghai Municipal Commission of Economy and Informatization, Zhu Mingyue, Honorary President of the Association, together with the directors and supervisors of the Association, representatives of JiuJu, and representatives of some member companies. The number of directors attending this meeting fully meets the requirements of the association's constitution, and all the agendas are in strict compliance with the norms and orderly progress.

undefined

At the beginning of the meeting, all participants listened attentively to the report "2025 Annual Work Summary and 2026 Annual Work Plan of the Association" and "Explanation on the Employment of Senior Consultant" made by Cui Zhongni, the Secretary General of the Association. The report systematically sorted out the results of the Association's work in policy promotion, industry exchange and collaboration, and accurate member services, and clearly drew a blueprint for the next year centered on the synergistic development of the industrial chain, technological innovation and upgrading, and two-way docking of international cooperation. Representatives of JiuJu Company and all the directors and supervisors participated in the consideration of the documents, and after full discussion, voted unanimously to adopt the above two documents and form a formal resolution of the meeting.

In the awarding ceremony, President Rao Xiaolei awarded honorary president Zhu Mingyue and senior advisor Wu Jianshi in turn, and expressed sincere gratitude to the two experts for their professional contributions to the industry and the development of the association; then President Rao awarded the bronze medals of governing units to representatives of JiuJu and other governing units one by one, and encouraged each unit to take the responsibility, take the initiative, and join hands to promote the rare earth industry of Shanghai to a new stage of high-quality development. Representatives of JiuJu Company solemnly received the medal and expressed that they would effectively fulfill the duties of the governing unit, actively participate in the work of the Association, and inject corporate strength into the development of the industry.

Zhu Mingyue, Honorary President of the Association, made a special speech around the policy direction of rare earth industry, domestic and international development situation and enterprise response strategy. He pointed out that the current international rare earth industry pattern is experiencing deep adjustment, the domestic policy guidance is becoming clearer and clearer, enterprises need to strictly abide by the policy red line, precisely anchored in the direction of development. The association should give full play to its role as a bridge between government and enterprises, and do a good job of policy interpretation and transmission to ensure that all member enterprises, including JiuJu, understand the policy and use it well. President Zhu emphasized that rare earth as a national strategic resource, the expansion of downstream application scenarios is the core key to industrial development, and hoped that the majority of enterprises to implement the spirit of the Central Economic Work Conference, firm development confidence, relying on Shanghai's high-end manufacturing industry advantages, focusing on the application of rare earths in the field of new energy, high-end equipment and other innovations, to create a distinctive business card for the development of Shanghai's rare earth industry.

Guo Changfa, a fourth-grade researcher of the New Materials Division of Shanghai Municipal Commission of Economy and Information Technology, highly affirmed the results of the Association's work in this year, and focused on the interpretation of the Commission's universal support policies in the field of new materials and the reporting process. He said that despite the challenges of the current macroeconomic environment, the rare earth industry, as a national strategic support industry, shouldering a heavy responsibility, but also contains a wide range of development opportunities. Guo Changfa encouraged member enterprises such as JiuJu to face up to the short-term difficulties, maintain strategic determination, increase R&D investment and scientific and technological innovation, and enhance market competitiveness with core technology. At the same time, he hoped that the Association would continue to optimize the member service system, accurately identify the development needs of enterprises, build an efficient government-enterprise communication platform, strive for more policy dividends for enterprises, and help the industry develop steadily and healthily.

Mr. Rao Xiaolei, President of the Association, made a summary statement and announced the successful completion of the agenda of the meeting. He said that the association will continue to strengthen the platform hub function in the future, in the policy docking, technical exchanges, industry chain synergies and other dimensions for member enterprises to provide more accurate services. He called on the government departments to strengthen the industry standardization and supervision, while increasing the support for R&D and innovation of the rare earth industry and the extension of the industrial chain, to create a high-quality industrial development environment; and expected all member enterprises, including JiuJu, to concentrate their efforts, give full play to Shanghai's leading advantage in the application of rare earths, and jointly promote the industry to achieve high-quality and sustainable development.

Magnetization of Magnetic Materials
3C Electronic Magnetization
Motor Rotor Magnetization
Car Speaker Magnetization
New Energy Vehicle Industry
Medical Equipment Industry
JiuJu Magnetization Case: Record of the whole process of magnetizing silicone magnetic products

JiuJu Magnetization Case: Record of the whole process of magnetizing silicone magnetic products

February 25, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service In the industrial manufacturing field, silicone magnetic products are widely used in smart wear and sealing components because of their flexibility and magnetic properties. The core of their magnetic properties depends on professional magnetization process. This time, JiuJu magnetization undertakes the project of magnetizing silicone products, and successfully realizes the product's magnetic force from 0.01 gauss to 15.5 gauss by leaps and bounds, the following is the whole process detail...

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJu Magnetizing Video Case: Rubber Silicone and NdFeB Magnetizing

JiuJu Magnetizing Video Case: Rubber Silicone and NdFeB Magnetizing

January 6, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service This paper focuses on the core process of magnetization of Rubber Silicone and NdFeB, the initial state of non-magnetic before magnetization, and the magnetic performance after magnetization. Through the gaussmeter measurement verification, it is clear that the highest magnetic unit after magnetization is up to 45.9 units and the highest magnetic unit after magnetization is up to 45.9 units (measured by gaussmeter). The magnetization process is the core link to realize the magnetic transformation of the two...

Precision Magnetization for Ferrite Cubes

Precision Magnetization for Ferrite Cubes

November 13, 2025

Specializing in ferrite cube micro-magnetization, we deliver customized, precise solutions tailored to ferrite cube material properties. By fine-tuning parameters, we ensure the magnetization meets exact standards, fulfilling high-precision magnetic requirements and adapting to applications with strict demands for magnetization accuracy.

电机装配工艺革命:为什么”先组装后充磁&#82...

电机装配工艺革命:为什么”先组装后充磁”正在取代传统前充磁?

2026年5月7日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 传统前充磁工艺中,磁钢提前充磁导致电机组装时磁极相斥、吸附铁屑,良率受限且存在安全隐患。”先组装、后充磁”通过整体充磁技术,让磁钢以无磁状态精准入位,组装完成后再统一充磁定型。这一变革消除了磁干扰,支持更高转速电机设计,同时将装配效率提升30%以上,正…

海外合作|美国德克萨斯州 EC 电机制造商与久巨共...

海外合作|美国德克萨斯州 EC 电机制造商与久巨共研智造方案

2026年4月29日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 2026年4月28日来自美国德克萨斯州的知名 EC 电机制造商一行到访久巨,双方围绕暖通空调(HVAC)、商用风机及空气净化设备领域的电机自动化生产线项目展开深度磋商,就高效电机智造升级、全球绿色供应链协同等关键议题达成多项初步共识。 作为北美EC电机领域的标杆企业…

为什么步进电机充磁后,力矩始终达不到设计值?

为什么步进电机充磁后,力矩始终达不到设计值?

2026年4月23日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 很多工厂的研发会问:“我用的是 N50 的钕铁硼磁钢,按理论算出来的力矩应该能到 0.5N・m,为什么充完磁测出来只有 0.38?磁材供应商说磁材没问题,那问题出在哪?” 很多时候,这和你的充磁机是否匹配产品特性有直接关系。 其实这个问题的核心,就是充磁未饱和—— 我们的…

空心杯电机充磁案例视频:实现微秒级响应,居然藏...

空心杯电机充磁案例视频:实现微秒级响应,居然藏在这步工序里?

2026年4月22日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 精密设备、航模、医疗仪器所用高端空心杯电机,微秒级超快响应的核心秘密,正是空心杯电机充磁工艺。独特无铁芯低惯量结构基础上,精准可控的空心杯电机充磁,能让磁钢磁场均匀稳定,大幅降低动态延迟。 标准化高精度空心杯电机充磁工序,可优化磁路一致性,减少转矩…

电机装配工艺革命:为什么”先组装后充磁&#82...

电机装配工艺革命:为什么”先组装后充磁”正在取代传统前充磁?

2026年5月7日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 传统前充磁工艺中,磁钢提前充磁导致电机组装时磁极相斥、吸附铁屑,良率受限且存在安全隐患。”先组装、后充磁”通过整体充磁技术,让磁钢以无磁状态精准入位,组装完成后再统一充磁定型。这一变革消除了磁干扰,支持更高转速电机设计,同时将装配效率提升30%以上,正…

海外合作|美国德克萨斯州 EC 电机制造商与久巨共...

海外合作|美国德克萨斯州 EC 电机制造商与久巨共研智造方案

2026年4月29日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 2026年4月28日来自美国德克萨斯州的知名 EC 电机制造商一行到访久巨,双方围绕暖通空调(HVAC)、商用风机及空气净化设备领域的电机自动化生产线项目展开深度磋商,就高效电机智造升级、全球绿色供应链协同等关键议题达成多项初步共识。 作为北美EC电机领域的标杆企业…

为什么步进电机充磁后,力矩始终达不到设计值?

为什么步进电机充磁后,力矩始终达不到设计值?

2026年4月23日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 很多工厂的研发会问:“我用的是 N50 的钕铁硼磁钢,按理论算出来的力矩应该能到 0.5N・m,为什么充完磁测出来只有 0.38?磁材供应商说磁材没问题,那问题出在哪?” 很多时候,这和你的充磁机是否匹配产品特性有直接关系。 其实这个问题的核心,就是充磁未饱和—— 我们的…

空心杯电机充磁案例视频:实现微秒级响应,居然藏...

空心杯电机充磁案例视频:实现微秒级响应,居然藏在这步工序里?

2026年4月22日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 精密设备、航模、医疗仪器所用高端空心杯电机,微秒级超快响应的核心秘密,正是空心杯电机充磁工艺。独特无铁芯低惯量结构基础上,精准可控的空心杯电机充磁,能让磁钢磁场均匀稳定,大幅降低动态延迟。 标准化高精度空心杯电机充磁工序,可优化磁路一致性,减少转矩…

电机装配工艺革命:为什么”先组装后充磁&#82...

电机装配工艺革命:为什么”先组装后充磁”正在取代传统前充磁?

2026年5月7日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 传统前充磁工艺中,磁钢提前充磁导致电机组装时磁极相斥、吸附铁屑,良率受限且存在安全隐患。”先组装、后充磁”通过整体充磁技术,让磁钢以无磁状态精准入位,组装完成后再统一充磁定型。这一变革消除了磁干扰,支持更高转速电机设计,同时将装配效率提升30%以上,正…

海外合作|美国德克萨斯州 EC 电机制造商与久巨共...

海外合作|美国德克萨斯州 EC 电机制造商与久巨共研智造方案

2026年4月29日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 2026年4月28日来自美国德克萨斯州的知名 EC 电机制造商一行到访久巨,双方围绕暖通空调(HVAC)、商用风机及空气净化设备领域的电机自动化生产线项目展开深度磋商,就高效电机智造升级、全球绿色供应链协同等关键议题达成多项初步共识。 作为北美EC电机领域的标杆企业…

为什么步进电机充磁后,力矩始终达不到设计值?

为什么步进电机充磁后,力矩始终达不到设计值?

2026年4月23日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 很多工厂的研发会问:“我用的是 N50 的钕铁硼磁钢,按理论算出来的力矩应该能到 0.5N・m,为什么充完磁测出来只有 0.38?磁材供应商说磁材没问题,那问题出在哪?” 很多时候,这和你的充磁机是否匹配产品特性有直接关系。 其实这个问题的核心,就是充磁未饱和—— 我们的…

空心杯电机充磁案例视频:实现微秒级响应,居然藏...

空心杯电机充磁案例视频:实现微秒级响应,居然藏在这步工序里?

2026年4月22日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 精密设备、航模、医疗仪器所用高端空心杯电机,微秒级超快响应的核心秘密,正是空心杯电机充磁工艺。独特无铁芯低惯量结构基础上,精准可控的空心杯电机充磁,能让磁钢磁场均匀稳定,大幅降低动态延迟。 标准化高精度空心杯电机充磁工序,可优化磁路一致性,减少转矩…

电机装配工艺革命:为什么”先组装后充磁&#82...

电机装配工艺革命:为什么”先组装后充磁”正在取代传统前充磁?

2026年5月7日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 传统前充磁工艺中,磁钢提前充磁导致电机组装时磁极相斥、吸附铁屑,良率受限且存在安全隐患。”先组装、后充磁”通过整体充磁技术,让磁钢以无磁状态精准入位,组装完成后再统一充磁定型。这一变革消除了磁干扰,支持更高转速电机设计,同时将装配效率提升30%以上,正…

海外合作|美国德克萨斯州 EC 电机制造商与久巨共...

海外合作|美国德克萨斯州 EC 电机制造商与久巨共研智造方案

2026年4月29日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 2026年4月28日来自美国德克萨斯州的知名 EC 电机制造商一行到访久巨,双方围绕暖通空调(HVAC)、商用风机及空气净化设备领域的电机自动化生产线项目展开深度磋商,就高效电机智造升级、全球绿色供应链协同等关键议题达成多项初步共识。 作为北美EC电机领域的标杆企业…

为什么步进电机充磁后,力矩始终达不到设计值?

为什么步进电机充磁后,力矩始终达不到设计值?

2026年4月23日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 很多工厂的研发会问:“我用的是 N50 的钕铁硼磁钢,按理论算出来的力矩应该能到 0.5N・m,为什么充完磁测出来只有 0.38?磁材供应商说磁材没问题,那问题出在哪?” 很多时候,这和你的充磁机是否匹配产品特性有直接关系。 其实这个问题的核心,就是充磁未饱和—— 我们的…

空心杯电机充磁案例视频:实现微秒级响应,居然藏...

空心杯电机充磁案例视频:实现微秒级响应,居然藏在这步工序里?

2026年4月22日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 精密设备、航模、医疗仪器所用高端空心杯电机,微秒级超快响应的核心秘密,正是空心杯电机充磁工艺。独特无铁芯低惯量结构基础上,精准可控的空心杯电机充磁,能让磁钢磁场均匀稳定,大幅降低动态延迟。 标准化高精度空心杯电机充磁工序,可优化磁路一致性,减少转矩…

电机装配工艺革命:为什么”先组装后充磁&#82...

电机装配工艺革命:为什么”先组装后充磁”正在取代传统前充磁?

2026年5月7日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 传统前充磁工艺中,磁钢提前充磁导致电机组装时磁极相斥、吸附铁屑,良率受限且存在安全隐患。”先组装、后充磁”通过整体充磁技术,让磁钢以无磁状态精准入位,组装完成后再统一充磁定型。这一变革消除了磁干扰,支持更高转速电机设计,同时将装配效率提升30%以上,正…

海外合作|美国德克萨斯州 EC 电机制造商与久巨共...

海外合作|美国德克萨斯州 EC 电机制造商与久巨共研智造方案

2026年4月29日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 2026年4月28日来自美国德克萨斯州的知名 EC 电机制造商一行到访久巨,双方围绕暖通空调(HVAC)、商用风机及空气净化设备领域的电机自动化生产线项目展开深度磋商,就高效电机智造升级、全球绿色供应链协同等关键议题达成多项初步共识。 作为北美EC电机领域的标杆企业…

为什么步进电机充磁后,力矩始终达不到设计值?

为什么步进电机充磁后,力矩始终达不到设计值?

2026年4月23日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 很多工厂的研发会问:“我用的是 N50 的钕铁硼磁钢,按理论算出来的力矩应该能到 0.5N・m,为什么充完磁测出来只有 0.38?磁材供应商说磁材没问题,那问题出在哪?” 很多时候,这和你的充磁机是否匹配产品特性有直接关系。 其实这个问题的核心,就是充磁未饱和—— 我们的…

空心杯电机充磁案例视频:实现微秒级响应,居然藏...

空心杯电机充磁案例视频:实现微秒级响应,居然藏在这步工序里?

2026年4月22日

Automated Magnetic Charging Integrated Solution 充磁设备 充磁自动化 磁测量仪器 充磁服务 精密设备、航模、医疗仪器所用高端空心杯电机,微秒级超快响应的核心秘密,正是空心杯电机充磁工艺。独特无铁芯低惯量结构基础上,精准可控的空心杯电机充磁,能让磁钢磁场均匀稳定,大幅降低动态延迟。 标准化高精度空心杯电机充磁工序,可优化磁路一致性,减少转矩…

Previous. NEXT STORY.

en_USEnglish