Jiu Ju Magnetizer
古董音响喇叭充磁修复案例—久巨充磁机
End-to-End Solution for Magnetization Automation
Automated Magnetic Charging Integrated Solution
In the field of audio collection and repair, due to the age of antique speakers, long-term use or storage environment, there are often magnet demagnetization problems, resulting in weak sound, declining resolution, low-frequency loss, losing the original sound quality level. Relying on professional magnetizing equipment and mature technology, JiuJu Automation has completed many cases of antique speaker magnetization repair, and the following combines real data and practical procedures to introduce the technology and examples in detail.
The repair is a classic antique bookshelf speaker unit, service over thirty years, the user feedback sound muffled, lack of dynamics, no obvious physical damage, the initial judgment for the natural demagnetization of the magnet. Repair personnel first Gauss meter on the center of the magnetic circuit for accurate detection.Magnetic field strength of only 133.5 gauss before magnetizationThis is the core reason for the deterioration of the sound quality, which is much lower than the magnetic field strength required for normal operation.
The core of magnetization restoration is to replenish the magnetism of demagnetized magnets through professional equipment to restore the working performance of the magnetic circuit. JUJI uses customized pulse magnetizer with special coils suitable for antique horns to clean the surface of the magnetic circuit of dust and impurities, to avoid magnetic interference during magnetization; and then accurately fix the horns on the magnetizing tooling, to ensure that the magnets are aligned with the center of the coils, and to prevent bias magnetism from leading to uneven magnetization.
The parameters of the equipment are debugged according to the characteristics of antique magnets, adopting low-voltage, short pulse mode to avoid high current damage to the speaker cone, voice coil and other fragile parts. After starting the equipment, the pulsed magnetic field instantly acts on the magnet to complete the directional magnetization. The whole process is safe and controllable, no overheating, no deformation, and maximize the protection of the original appearance of the antique unit.
After the magnetization was completed and cooled down for ten minutes, the same Gaussmeter and the same test point were used again for retesting.Magnetic field strength stabilized to 360.8 gaussThe magnetism is restored to a healthy level and the magnetic field is evenly distributed without localized overcharging or undercharging. The data enhancement is real and reasonable, without over-pursuing high values, to ensure the long-term stable work of the magnet.
JiuJu reminds us that demagnetization of antique speakers' magnets is a common aging problem, and blind magnetization can easily cause irreversible damage. Professional magnetization restoration needs to take into account the technical accuracy and protection of cultural relics, JiuJu with many years of hands-on experience, for different years, different models of antique audio speakers, customized exclusive magnetization program, not only to solve the demagnetization fault, but also to maximize the preservation of the collection value of the equipment and the characteristics of the sound quality.
Magnetization of Magnetic Materials
3C Electronic Magnetization
Motor Rotor Magnetization
Car Speaker Magnetization
New Energy Vehicle Industry
Medical Equipment Industry
Other Industries
衫钴磁铁充磁视频案例—久巨充磁机
2026年5月23日
轴承钢因其高硬度、耐磨性广泛应用于精密轴承制造，但鲜为人知的是，通过专业充磁工艺，轴承钢同样可被赋予稳定的磁性功能。久巨充磁机采用脉冲磁场定向技术，可在20秒内完成轴承钢的磁化激活。
轴承钢充磁视频案例—久巨充磁机
2026年5月22日
轴承钢因其高硬度、耐磨性广泛应用于精密轴承制造，但鲜为人知的是，通过专业充磁工艺，轴承钢同样可被赋予稳定的磁性功能。久巨充磁机采用脉冲磁场定向技术，可在20秒内完成轴承钢的磁化激活。
硅胶磁材产品的充磁案例—久巨充磁机
February 25, 2026
In the field of industrial manufacturing, silicone magnetic products are widely used in smart wearable, sealed components and other scenarios due to both flexible qualities and magnetic properties. The core of the accurate magnetic properties depends on the professional magnetization process. This time, JiuJi Magnetization undertook the project of magnetizing silicone products, and successfully realized the product's magnetic force from 0.01 gauss to 15.5 gauss by leaps and bounds, and the following is the detailed record of the whole process.
Magnetization for Magnetic Phone Chargers – Precisely Aligned with Core Magnetic Charging Processes
November 13, 2025
We specialize in magnetization and testing services for magnetic phone charger heads and magnetic data cables. Using precise magnetization processes, we ensure stable magnetic performance of charger heads and professionally verify that data cables meet magnetic performance standards. This guarantees secure connections, reliable use, and compatibility with all mobile magnetic charging scenarios.
JIUJU Electronic Magnetizers: Solving Industry Pain Points and Achieving the Optimal Balance of Performance and Cost
November 11, 2025
JIUJU electronic magnetizers address the challenges faced by electronics manufacturers. Using transformer step-up and pulse phase-shift control technology, they ensure magnetization precision and efficiency. Intelligent dual cooling and optimized material selection reduce costs, achieving a balance of high performance and low cost while improving production efficiency.
电机维修行业如何选择充磁机视频讲解—久巨充磁机
2026年5月28日
不少电机维修从业者疑惑该如何挑选适配的久巨充磁机，也不清楚维修场景下的充磁实操方式。市面多数充磁机主打批量生产工况，和维修作业需求存在差异，掌握两类核心选型使用方法，就能适配中大型维修门店作业需求。
汽车电机转子充磁机视频案例—久巨充磁机
2026年5月7日
传统前充磁工艺中，磁钢提前充磁导致电机组装时磁极相斥、吸附铁屑，良率受限且存在安全隐患。”先组装、后充磁”通过整体充磁技术，让磁钢以无磁状态精准入位，组装完成后再统一充磁定型。这一变革消除了磁干扰，支持更高转速电机设计，同时将装配效率提升30%以上，正成为新能源电机、伺服电机厂商的主流选择。
JIUJU 3050 Magnetizer Speaker Transfer Fixture – Dedicated Fixture for NdFeB Magnetization and Adsorption
November 13, 2025
The JIUJU 3050 magnetizer speaker transfer fixture is specially designed for NdFeB magnetization applications. It ensures stable product adsorption during the magnetization process, preventing displacement and guaranteeing precise magnetization. Fully compatible with speaker production workflows, it serves as an efficient supporting device for NdFeB magnetization operations.
JIUJU Speaker Magnetization Practical Guide: Principles and Hands-On Procedures
November 13, 2025
Based on electromagnetic induction, magnetic domains are enhanced through regulated pulse currents. This guide covers practical steps including pre-magnetization equipment setup and speaker inspection, fixture securing, circuit connections, pulse magnetization, as well as post-magnetization testing with a gauss meter and sound quality assessment. It helps ensure precise JIUJU speaker magnetization while maintaining magnetic field strength and audio performance.
汽车电机转子充磁机视频案例—久巨充磁机
2026年5月7日
传统前充磁工艺中，磁钢提前充磁导致电机组装时磁极相斥、吸附铁屑，良率受限且存在安全隐患。”先组装、后充磁”通过整体充磁技术，让磁钢以无磁状态精准入位，组装完成后再统一充磁定型。这一变革消除了磁干扰，支持更高转速电机设计，同时将装配效率提升30%以上，正成为新能源电机、伺服电机厂商的主流选择。
JIUJU Four-Station Motor Magnetizer – A Revolutionary Solution to Enhance New Energy Vehicle Motor Manufacturing Efficiency
November 10, 2025
Professional Four-Station Motor Magnetizer Solution – Providing highly efficient, automated magnetization and testing integrated equipment for new energy vehicles, consumer electronics, and industrial motor manufacturers. Significantly boosts production efficiency by 300%, reduces labor costs, and ensures consistent product quality.
JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization
January 7, 2026
Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...
3000V行业通用款充磁机接线操作流程视频—久巨充磁机
2026年5月27日
操作前务必切断设备总电源，确认机身完全断电，杜绝带电接线作业。先核查电源线、连接线外观无破损老化，接口无杂物污渍。按照设备标识对应接口，依次连接供电线路、充磁线圈线路与控制线，插头卡扣锁紧到位，线路排布规整不挤压缠绕。
3000V充磁机冰水机操作流程演示视频—久巨充磁机
2026年5月26日
本期全面讲解冰水机规范操作步骤，熟练掌握正确用法，有效提升设备运行效率。开机前检查管路、线路及水位，确认无渗漏、配件完好。依次接通总电源，查看设备自检状态，依据生产需求设定水温、压力等运行参数。
3000V行业通用款充磁机操作流程视频—久巨充磁机
2026年5月25日
久巨 3000V 通用款充磁机开机前先检查线路、接线及外观部件完好，确认充磁工装放置稳固无松动。接通电源后静待设备自检完成，按需设定充磁电压、充磁时长等参数，核对参数匹配产品规格。
English 
Chinese 
Russian 
Vietnamese 
Japanese 
Korean 
Thai 
Hindi 
Bengali 
French 
Spanish 
Portuguese