Case Study: Magnetization of Hard Magnetic Materials Using a Mixture of Nylon and Magnetic Powder by Jiuju—Jiuju Magnetizer
End-to-End Solution for Magnetization Automation
Automated Magnetic Charging Integrated Solution
Nylon-bonded hard magnetic powder is a commonly used bonded permanent magnet material in the industrial sector today. Leveraging the high toughness and ease of injection molding of the nylon matrix, combined with the permanent magnetic properties of hard magnetic powder, it is widely used in applications such as micro motors, smart sensors, and precision electronic components. After molding, the magnetic domains within these magnets are in a disordered state, and their initial magnetization is zero. They must be magnetized using specialized high-voltage magnetizing equipment to achieve stable magnetic performance. This article, in conjunction with Jiuju,3000V MagnetizerHands-on Project: Sharing a Complete Case Study on the Magnetization of Nylon-Magnetic Powder Composite Hard Magnets.

The test sample in this case study is a one-piece molded nylon-magnetic powder composite hard magnetic product. The finished product was not magnetized after molding. As measured by high-precision magnetic flux instruments, its initial magnetic value was 0, fully consistent with the characteristics of a non-magnetized product. This type of magnet presents a key technical challenge: the nylon substrate encapsulates the magnetic powder and shields the magnetic field. Conventional low-voltage magnetization equipment lacks sufficient magnetic field penetration, making it highly prone to issues such as incomplete magnetization, uneven magnetic strength, and substandard performance. Therefore, high-voltage pulse magnetization equipment must be used for this process.

This test usedJiuju 3000V High-Energy Pulse MagnetizerThe equipment is suitable for magnetizing various hard magnetic materials, such as ferrite and nylon-bonded magnets. It features precise voltage control, a stable pulsed magnetic field, and instantaneous energy storage and release, enabling it to overcome the magnetic field shielding limitations of nylon substrates and fully activate the performance of magnetic powders. The equipment is easy to operate and highly safe, making it suitable for both mass production and sample testing scenarios.

The practical process strictly follows standardized procedures: First, inspect the sample to ensure there is no damage or deformation, and verify that the equipment is grounded and the cooling system is functioning properly; precisely set the magnetizing voltage to 3,000 V, place the sample in the center of the dedicated magnetizing coil, and ensure uniform magnetic field coverage. Upon starting the equipment, the capacitors instantaneously store and discharge energy, generating a high-intensity pulsed magnetic field that rapidly aligns the disordered magnetic domains within the magnet into an ordered arrangement, completing the magnetization process in just a few seconds.

After magnetization was completed, performance testing was conducted. The sample exhibited uniform and stable magnetic strength, with a final magnetic flux value of 634.7 V. It demonstrated high saturation, with no issues such as magnetic decay or localized weak magnetic fields, and fully met the customer’s product design and mass production standards. This case study fully demonstrates that,Jiuju 3000V Magnetizing MachineIt is perfectly suited for the magnetization requirements of nylon-magnetic powder composite permanent magnets, effectively addressing the industry’s challenges of insufficient magnetization and unstable performance. The equipment balances precision and efficiency, making it suitable for both sample testing and mass production of small- to medium-sized bonded magnets, and provides a mature and reliable magnetization solution for the processing and production of various nylon-composite permanent magnet products.
Magnetization of Magnetic Materials
3C Electronic Magnetization
Motor Rotor Magnetization
Car Speaker Magnetization
New Energy Vehicle Industry
Medical Equipment Industry
Other Industries
Jiu Ju Magnetizer



























