How to choose Magnetization Equipment? Five core indicators explained clearly at once
End-to-End Solution for Magnetization Automation
Automated Magnetic Charging Integrated Solution
Analysis of five major selection indicators
'Which magnetization equipment is the best?' There is no standard answer to this question — the key is how many core indicators your actual needs can match.
Indicator 1: Magnetization voltage. This is the primary parameter determining the upper limit of magnetization magnetic field strength. The higher the voltage, the stronger the pulsed magnetic field generated by the coil. Ferrite magnetization requires lower voltage; NdFeB grades require moderately high voltage; high-coercivity Samarium Cobalt (SmCo) materials require even higher voltage.

Indicator 2: Magnetization current. It affects the energy injection speed of the magnetization coil. The larger the current, the shorter the magnetization time, but the higher the requirements for the coil, capacitor, and heat dissipation system. During selection, a balance must be found between speed and equipment cost.
Indicator 3: Magnetization cycle time. The time to complete a single magnetization directly affects production line capacity. Manual magnetization stations have slower cycles, semi-automatic equipment has moderate cycles, and fully automatic magnetization production lines have extremely fast cycles with very high daily capacity.

Indicator 4: Demagnetization rate control. The magnetic flux decay ratio of magnets in their natural state after magnetization is a key quality indicator. High-quality equipment and processes can keep the demagnetization rate at an extremely low level. A high demagnetization rate indicates that magnetization has not reached saturation, which is the most common quality hidden risk of many low-priced equipment.
Indicator 5: Equipment compatibility. Can one magnetization device be compatible with magnets of multiple specifications? How long does it take to change fixtures? This is crucial for factories with multi-variety, small-batch production. JiuJu's modular design for magnetization equipment compatibility allows the same device to cover multiple magnets simply by changing models.

Selection self-check list: What is your magnetic material type and grade? What is the daily capacity target in pieces? Do you need multi-pole or single-pole magnetization? Does it need to be integrated into an automated production line? What is the budget? Communicating with suppliers using these five questions can quickly screen out the most suitable solution. JiuJu's selection engineers will combine your magnetic material parameters and capacity planning to provide configuration recommendations that balance cost-effectiveness and scalability.
Magnetization of Magnetic Materials
3C Electronic Magnetization
Motor Rotor Magnetization
Car Speaker Magnetization
New Energy Vehicle Industry
Medical Equipment Industry
Other Industries
Jiu Ju Magnetizer



























