Magnetizing Equipment

Magnetization Automation

Magnet Measuring Instruments

Magnetization Services

Magnetizers may have various failures during long-term use, and timely detection and treatment of these problems is essential to ensure production efficiency. The following are the common failures and solutions:

Power supply failure:

Phenomenon: The magnetizer cannot be turned on and the power indicator does not light up.
Causes: broken power cord, loose plug, damaged power switch, blown fuse.
SOLUTION: Check power cord connections, replace damaged switches and fuses, and make sure grounding is good.

Poor magnetization:

Phenomenon: Insufficient magnetic field strength after magnetization, unstable magnetic properties.
Causes: Insufficient magnetizing voltage, coil damage, capacitor aging, improper material selection.
Solution: Increase the magnetizing voltage, check the insulation of the coil, replace the aging capacitor, and make sure the material matches the equipment.

Control circuit failure:

Phenomenon: The magnetization process is unstable and the parameter display is abnormal.
Cause: Relay failure, SCR damage, aging control chip.
Solution: Check control components, replace damaged relays and SCRs, and recalibrate control parameters.

Security Protection Trigger:

Phenomenon: The equipment stops automatically and the protection indicator lights up.
Cause: Over-current, over-voltage, over-temperature protection triggered.
Solution: Check the load condition, ensure good heat dissipation, and adjust the magnetization parameters to a safe range.

JiuJu magnetizer has perfect self-diagnostic function, which can monitor the operation status of the equipment in real time, and discover and warn potential problems in time. JiuJu magnetizer adopts modular design, key components such as capacitors, SCRs, etc. are imported brands, which greatly reduces the failure rate.

Regular Maintenance Recommendations: JiuJi magnetizers are recommended to check the capacitor performance monthly, clean the inside of the equipment quarterly, and perform full calibration and maintenance annually. JiuJu magnetizer provides professional after-sales service, including equipment installation and commissioning, operation training, fault repair and other one-stop services.

Magnetization of Magnetic Materials

3C Electronic Magnetization

Motor Rotor Magnetization

Car Speaker Magnetization

New Energy Vehicle Industry

Medical Equipment Industry

Other Industries

久巨尼龙磁粉混合硬磁充磁应用案例—久巨充磁机

2026年6月9日

尼龙磁粉混合硬磁是目前工业领域常用的粘结永磁材料，依托尼龙基材韧性强、易注塑成型的优势，搭配硬磁磁粉的永磁特性，广泛应用于微型电机、智能传感器、精密电子配件等场景。此类磁体成型后内部磁畴处于无序状态，初始磁性归零，必须通过专业高压充磁设备完成磁化，才能实现稳定磁性能输出。本文结合久巨3000V充磁机实操项目，分享尼龙磁粉混合硬磁的完整充磁应用案例。

磁铁充磁假饱和vs真饱和矫顽力3倍法则视频讲解—久巨充磁机

2026年6月6日

久巨深耕充磁技术多年，带你一眼识破真假饱和充磁。下期我们将手把手教你亲手测量磁通曲线，用科学数据验证充磁效果，再也不被不良厂家忽悠！

衫钴磁铁充磁视频案例—久巨充磁机

2026年5月23日

轴承钢因其高硬度、耐磨性广泛应用于精密轴承制造，但鲜为人知的是，通过专业充磁工艺，轴承钢同样可被赋予稳定的磁性功能。久巨充磁机采用脉冲磁场定向技术，可在20秒内完成轴承钢的磁化激活。

轴承钢充磁视频案例—久巨充磁机

2026年5月22日

轴承钢因其高硬度、耐磨性广泛应用于精密轴承制造，但鲜为人知的是，通过专业充磁工艺，轴承钢同样可被赋予稳定的磁性功能。久巨充磁机采用脉冲磁场定向技术，可在20秒内完成轴承钢的磁化激活。

Magnetization for Magnetic Phone Chargers – Precisely Aligned with Core Magnetic Charging Processes

November 13, 2025

We specialize in magnetization and testing services for magnetic phone charger heads and magnetic data cables. Using precise magnetization processes, we ensure stable magnetic performance of charger heads and professionally verify that data cables meet magnetic performance standards. This guarantees secure connections, reliable use, and compatibility with all mobile magnetic charging scenarios.

JIUJU Electronic Magnetizers: Solving Industry Pain Points and Achieving the Optimal Balance of Performance and Cost

November 11, 2025

JIUJU electronic magnetizers address the challenges faced by electronics manufacturers. Using transformer step-up and pulse phase-shift control technology, they ensure magnetization precision and efficiency. Intelligent dual cooling and optimized material selection reduce costs, achieving a balance of high performance and low cost while improving production efficiency.

水泵电机多级充磁工艺讲解视频—久巨充磁机 #

2026年6月5日

久巨针对水泵电机高负荷、长周期运行的工况特点，研发专用多极充磁技术，解决了传统充磁磁场分布不均、磁钢利用率低、易退磁的行业痛点。

电机维修行业如何选择充磁机视频讲解—久巨充磁机

2026年5月28日

不少电机维修从业者疑惑该如何挑选适配的久巨充磁机，也不清楚维修场景下的充磁实操方式。市面多数充磁机主打批量生产工况，和维修作业需求存在差异，掌握两类核心选型使用方法，就能适配中大型维修门店作业需求。

压缩机电机充磁视频—久巨充磁机

2026年5月16日

久巨自动化专注压缩机电机充磁领域，提供高精度、智能化充磁设备与定制化解决方案，有效提升电机能效与使用寿命，助力高效稳定生产。

汽车马达转子充磁视频—久巨充磁机

2026年5月12日

久巨自动化汽车马达转子充磁机，采用先进充磁技术，确保转子磁场均匀稳定，提升马达性能与效率，广泛应用于新能源汽车驱动电机制造。

古董音响喇叭充磁修复案例—久巨充磁机

February 27, 2026

In the field of audio collection and repair, due to the age of antique speakers, long-term use or storage environment, there are often magnet demagnetization problems, resulting in weak sound, declining resolution, low-frequency loss, losing the original sound quality level. Relying on professional magnetizing equipment and mature technology, JiuJu Automation has completed many cases of antique speaker magnetization repair, and the following combines real data and practical procedures to introduce the technology and examples in detail.

JIUJU 3050 Magnetizer Speaker Transfer Fixture – Dedicated Fixture for NdFeB Magnetization and Adsorption

November 13, 2025

The JIUJU 3050 magnetizer speaker transfer fixture is specially designed for NdFeB magnetization applications. It ensures stable product adsorption during the magnetization process, preventing displacement and guaranteeing precise magnetization. Fully compatible with speaker production workflows, it serves as an efficient supporting device for NdFeB magnetization operations.

JIUJU Speaker Magnetization Practical Guide: Principles and Hands-On Procedures

November 13, 2025

Based on electromagnetic induction, magnetic domains are enhanced through regulated pulse currents. This guide covers practical steps including pre-magnetization equipment setup and speaker inspection, fixture securing, circuit connections, pulse magnetization, as well as post-magnetization testing with a gauss meter and sound quality assessment. It helps ensure precise JIUJU speaker magnetization while maintaining magnetic field strength and audio performance.

汽车马达转子充磁视频—久巨充磁机

2026年5月12日

久巨自动化汽车马达转子充磁机，采用先进充磁技术，确保转子磁场均匀稳定，提升马达性能与效率，广泛应用于新能源汽车驱动电机制造。

汽车电机转子充磁机视频案例—久巨充磁机

2026年5月7日

传统前充磁工艺中，磁钢提前充磁导致电机组装时磁极相斥、吸附铁屑，良率受限且存在安全隐患。”先组装、后充磁”通过整体充磁技术，让磁钢以无磁状态精准入位，组装完成后再统一充磁定型。这一变革消除了磁干扰，支持更高转速电机设计，同时将装配效率提升30%以上，正成为新能源电机、伺服电机厂商的主流选择。

JIUJU Four-Station Motor Magnetizer – A Revolutionary Solution to Enhance New Energy Vehicle Motor Manufacturing Efficiency

November 10, 2025

Professional Four-Station Motor Magnetizer Solution – Providing highly efficient, automated magnetization and testing integrated equipment for new energy vehicles, consumer electronics, and industrial motor manufacturers. Significantly boosts production efficiency by 300%, reduces labor costs, and ensures consistent product quality.

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

20秒教你如何选充磁机视频讲解—久巨充磁机

2026年5月29日

20秒快速掌握久巨充磁机选型技巧，轻松选到适配机型。选型可从多维度逐一核对，先判定产品磁体类别，不同材质对应适配机型规格。

3000V行业通用款充磁机接线操作流程视频—久巨充磁机

2026年5月27日

操作前务必切断设备总电源，确认机身完全断电，杜绝带电接线作业。先核查电源线、连接线外观无破损老化，接口无杂物污渍。按照设备标识对应接口，依次连接供电线路、充磁线圈线路与控制线，插头卡扣锁紧到位，线路排布规整不挤压缠绕。

3000V充磁机冰水机操作流程演示视频—久巨充磁机

2026年5月26日

本期全面讲解冰水机规范操作步骤，熟练掌握正确用法，有效提升设备运行效率。开机前检查管路、线路及水位，确认无渗漏、配件完好。依次接通总电源，查看设备自检状态，依据生产需求设定水温、压力等运行参数。

3000V行业通用款充磁机操作流程视频—久巨充磁机

2026年5月25日

久巨 3000V 通用款充磁机开机前先检查线路、接线及外观部件完好，确认充磁工装放置稳固无松动。接通电源后静待设备自检完成，按需设定充磁电压、充磁时长等参数，核对参数匹配产品规格。