JiuJi Magnetism Industry News] ANSYS Maxwell Magnetic Component Design Training in Huizhou Successfully Ended

December 12, 2025Industry News ANSYS Maxwell.JiuJu Magnet electromagnetic simulation Magnetic component design Magnetic Components14170

End-to-End Solution for Magnetization Automation

Automated Magnetic Charging Integrated Solution

Magnetizing Equipment

Magnetization Automation

Magnet Measuring Instruments

Magnetization Services

From November 28th to 29th, 2025, the fourth "ANSYS Maxwell Electromagnetic Simulation and Magnetic Component Design Training Course" organized by Guangdong Magnetic Components Industry Association (GMCIA) was successfully held in Huizhou City, Guangdong Province. As the finale of the association's technical training in 2025, this training continues the trend of annual "expansion and upgrading" - since 2025, the association has expanded the annual technical training from two sessions to four sessions per year to meet the industry's needs with more intensive and more accurate courses, attracting more and more students from South China. industry needs, attracting extensive attention and active participation from enterprises in South China.

I. Scale of training and participation

The training received a warm response from enterprises in South China, a total of 41 enterprises, 106 engineers registered to participate in the actual number of 87 to the class, a significant degree of participation. After the training, the Association recovered 53 effective post-course questionnaires, which provided valuable first-line feedback data for objectively evaluating the training effect and optimizing the follow-up course system, laying a foundation for the "precision" of industry training.

Two, three core course modules, to create cutting-edge practical knowledge feast

The two-day training focuses on "ANSYS Maxwell electromagnetic simulation technology" and "magnetic component design" two core blocks, the use of "theoretical analysis + simulated real operation + case analysis Using the three-dimensional teaching mode of "theoretical analysis + simulation + case study", senior experts in the industry were invited to give lectures systematically, and the contents are both cutting-edge and practical: Module 1: Introduction to ANSYS Maxwell Electromagnetism Simulation -- Analysis and Practical Operation of the Whole Process Lecture by Dr. Xie Wenyan, a master director from Fuzhou University, focusing on the whole process of ANSYS Maxwell software operation. Maxwell software operation process, combined with ten typical cases, hand in hand to guide students to master the key skills of "modeling → solution → results analysis. The course also optimizes the rhythm of case study according to the feedback from the students to ensure the learning effect. Module 2: Optimized Design of Magnetic Components for 40kW & 60kW Supercharger Modules -- From Material Characteristics to Loss Control Mr. Nie Yingfa, member of the China Magnetic Materials Industry Expert Committee and senior engineer of Tamura (China), will analyze core selection, loss optimization, thermal management, EMI suppression, etc., using popular applications such as automotive OBC transformers and high-frequency inductors as an entry point. The course content closely matches the actual R&D needs of enterprises and provides practical design experience. Module 3: Integrated Design Methods for Electromagnetic Components of Power Electronic Devices Mr. Liu Yitao, Associate Professor of Shenzhen University and Senior Member of IEEE, brings cutting-edge topics covering core themes such as magnetic integration, harmonic suppression, and multi-physical field coupling, which not only broadens the technical vision of the participants, but also gives a clear outlook on the future development path of integrated design.

Third, the training effect is highly recognized, and the feedback data are eye-catching.

According to the statistics of 53 valid post-course questionnaires, the training satisfaction and usefulness of the performance is outstanding: overall satisfaction exceeds 90%: more than 90% trainees on the training course as a whole said "satisfied" or "very satisfied"; knowledge acquisition sense of nearly 80%: Nearly 80% of the trainees felt that they had "basically gained" or "fully gained" the expected knowledge and skills; the degree of matching of needs reached 85%+: more than 85% trainees gave feedback that the content of the training was "in line with" or "fully in line with" their needs. Matching degree of demand 85%+: more than 85% trainees feedback that the training content "meets" or "fully meets" their own work needs; Case utility is recognized: most trainees highly evaluate the quality of the classroom cases, that the cases are close to the actual work scenarios, and that they can effectively improve the ability to solve practical problems.

Fourth, the annual training ended successfully, JiuJu hand in hand with the Association to promote the development of the industry

So far, Guangdong Magnetic Components Industry Association 2025 four technical training activities have been successfully concluded. As a backbone enterprise in the industry, JiuJu participated in the four annual training, witnessed the continuous optimization and upgrading of the course system, and its feedback on the practical needs and technical suggestions has also become an important reference for the Association's course iteration.

Looking ahead, the association will continue to be guided by the actual needs of enterprises, continue to optimize the course system, invite more experts from the field to create more high-quality thematic training. Here, the association eagerly calls on the members, including JiuJu, to maintain close communication with the secretariat, provide timely feedback on the real training needs, and join hands to jointly promote the technological innovation and talent pool of the magnetic components industry, and inject strong momentum for the sustainable and healthy development of the industry!

Magnetization of Magnetic Materials

3C Electronic Magnetization

Motor Rotor Magnetization

Car Speaker Magnetization

New Energy Vehicle Industry

Medical Equipment Industry

春风启新程，实干赴新篇｜久巨自动化 2026 开工大吉

2026年2月25日

Automated Magnetic Charging Integrated Solution 充磁设备充磁自动化磁测量仪器充磁服务春回大地启新章，奋楫扬帆赴新程。2026年农历正月初八，正值新春开工吉日，久巨自动化暖意盎然、生机勃发，全体同仁褪去新春的闲适，以饱满的热忱、昂扬的姿态齐聚厂区，共同开启新一年的奋斗之旅，用实干践行初心，用奋进书写荣光。上午8时整…

久巨充磁案例：硅胶磁材产品的充磁全流程记录

2026年2月25日

Automated Magnetic Charging Integrated Solution 充磁设备充磁自动化磁测量仪器充磁服务在工业制造领域，硅胶磁性产品因兼具柔性特质与磁性能，广泛应用于智能穿戴、密封组件等场景。其磁性能的精准赋予，核心依赖专业充磁工艺。本次久巨充磁承接硅胶产品充磁项目，成功实现产品磁力从0.01高斯到15.5高斯的跨越式提升，以下为全流程详…

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJu Magnetizing Video Case: Rubber Silicone and NdFeB Magnetizing

January 6, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service This paper focuses on the core process of magnetization of Rubber Silicone and NdFeB, the initial state of non-magnetic before magnetization, and the magnetic performance after magnetization. Through the gaussmeter measurement verification, it is clear that the highest magnetic unit after magnetization is up to 45.9 units and the highest magnetic unit after magnetization is up to 45.9 units (measured by gaussmeter). The magnetization process is the core link to realize the magnetic transformation of the two...

久巨充磁案例-古董音响喇叭充磁修复，技术与实例介绍

2026年2月27日

久巨充磁案例-古董音响喇叭充磁修复，技术与实例介绍

一文读懂：电机充磁原理、必要性与永磁电机底层逻辑

2026年2月26日

Automated Magnetic Charging Integrated Solution 充磁设备充磁自动化磁测量仪器充磁服务电机充磁，是永磁同步电机、无刷直流电机等永磁电机制造与维护的核心步骤。它依托电磁感应与磁场能量转换原理，借助外部强磁场让永磁体内部磁畴定向排列，从而形成稳定持久的磁性，是保障电机正常运行的基础环节。一、充磁的本质：为电机赋予…