Magnetizing Equipment

Magnetization Automation

Magnet Measuring Instruments

Magnetization Services

Automotive motors have stringent requirements for magnetic performance consistency, and surface magnetic field testing after magnetization is an indispensable quality control step. Even the slightest deviation in the magnetic field can directly reduce the motor’s overall performance: uneven pole strength leads to increased torque ripple, causing NVH-related noise; misalignment of the magnetic poles can reduce efficiency and affect the vehicle’s range; issues such as incorrect polarity installation or localized weak magnetization cannot be detected by visual inspection alone, and if discovered only after installation, the cost of rework is extremely high. Jiuju’s automotive motor surface magnetic field testing solution automatically scans the rotor’s surface magnetic field upon completion of magnetization. It quantifies the peak values, waveforms, and symmetry of each magnetic pole, precisely detecting even the slightest deviations. Defective units are immediately screened out, and inspection data is synchronously recorded for traceability, ensuring the stable performance of batch-produced motors from the source.

Magnetization of Magnetic Materials

3C Electronic Magnetization

Motor Rotor Magnetization

Car Speaker Magnetization

New Energy Vehicle Industry

Medical Equipment Industry

Video Case Study on the Magnetization Process for Jiuju Irregular-Shaped Cobalt Magnets—Jiuju Magnetizer

September 12, 2026

Irregularly shaped samarium-cobalt magnets have complex magnetic pole configurations. Combined with the high-temperature resistance and high coercive force of samarium-cobalt materials, this makes them highly prone to issues such as magnetic field non-uniformity and uneven magnetization during magnetization, placing high demands on tooling and process parameters.

Video Case Study on the Magnetization Process for Sintered Neodymium-Iron-Boron Magnetic Rings—Jiuju Magnetizer

September 11, 2026

Sintered neodymium-iron-boron magnetic rings are widely used in precision equipment such as motors and sensors; multipole magnetization imposes stringent requirements on magnetic field uniformity and the positioning accuracy of the magnetic poles.

Video Demonstrating How Jiuju Cobalt Magnets Achieve Stable Magnetization—Jiuju Magnetizer

September 9, 2026

Thanks to their high coercivity and high-temperature resistance, samarium-cobalt magnets are widely used in high-temperature precision applications, where stable and uniform magnetic output is key to ensuring their core performance.

Video on Automatic Magnet Magnetization—Jiuju Magnetizer

August 17, 2026

Magnetization itself is a physical process that takes place in milliseconds; what truly slows down the overall production cycle are the manual loading, unloading, and alignment and calibration steps. In manual magnetization mode, workers must pick up and place each part individually and verify the polarity direction, which takes several seconds per part. Production capacity fluctuates significantly depending on the workers’ skill level and fatigue, and the strong magnetic field environment also poses safety hazards.

Video Demonstrating the Magnetization of Jiuju High-Frequency Drivers—Jiuju Magnetizer

September 14, 2026

Problems such as unusual noises during motor operation, reduced power output, and increased energy consumption often stem not from damaged windings or bearings, but from uneven magnetic field distribution.

Video Demonstrating Jiuju's Magnetization Process for Antique Speakers—Jiuju Magnetizer

September 13, 2026

To address the need for rework due to defective magnetic circuits in audio speakers, the restoration of demagnetized finished products, and the elimination of residual magnetism during the production process, Jiuju offers an integrated magnetization and demagnetization process solution that covers magnetic circuit components for speakers of all sizes, including both internal and external magnet types.

Video Case Study on the Magnetization Process for Jiuju Irregular-Shaped Cobalt Magnets—Jiuju Magnetizer

September 12, 2026

Irregularly shaped samarium-cobalt magnets have complex magnetic pole configurations. Combined with the high-temperature resistance and high coercive force of samarium-cobalt materials, this makes them highly prone to issues such as magnetic field non-uniformity and uneven magnetization during magnetization, placing high demands on tooling and process parameters.

Video Case Study on the Magnetization Process for Sintered Neodymium-Iron-Boron Magnetic Rings—Jiuju Magnetizer

September 11, 2026

Sintered neodymium-iron-boron magnetic rings are widely used in precision equipment such as motors and sensors; multipole magnetization imposes stringent requirements on magnetic field uniformity and the positioning accuracy of the magnetic poles.

Video Demonstrating the Magnetization of Jiuju High-Frequency Drivers—Jiuju Magnetizer

September 14, 2026

Problems such as unusual noises during motor operation, reduced power output, and increased energy consumption often stem not from damaged windings or bearings, but from uneven magnetic field distribution.

Video Demonstrating Jiuju's Magnetization Process for Antique Speakers—Jiuju Magnetizer

September 13, 2026

To address the need for rework due to defective magnetic circuits in audio speakers, the restoration of demagnetized finished products, and the elimination of residual magnetism during the production process, Jiuju offers an integrated magnetization and demagnetization process solution that covers magnetic circuit components for speakers of all sizes, including both internal and external magnet types.

Video Case Study on the Magnetization Process for Jiuju Irregular-Shaped Cobalt Magnets—Jiuju Magnetizer

September 12, 2026

Irregularly shaped samarium-cobalt magnets have complex magnetic pole configurations. Combined with the high-temperature resistance and high coercive force of samarium-cobalt materials, this makes them highly prone to issues such as magnetic field non-uniformity and uneven magnetization during magnetization, placing high demands on tooling and process parameters.

Video Case Study on the Magnetization Process for Sintered Neodymium-Iron-Boron Magnetic Rings—Jiuju Magnetizer

September 11, 2026

Sintered neodymium-iron-boron magnetic rings are widely used in precision equipment such as motors and sensors; multipole magnetization imposes stringent requirements on magnetic field uniformity and the positioning accuracy of the magnetic poles.

Video Demonstrating the Magnetization of Jiuju High-Frequency Drivers—Jiuju Magnetizer

September 14, 2026

Problems such as unusual noises during motor operation, reduced power output, and increased energy consumption often stem not from damaged windings or bearings, but from uneven magnetic field distribution.

Video Demonstrating Jiuju's Magnetization Process for Antique Speakers—Jiuju Magnetizer

September 13, 2026

To address the need for rework due to defective magnetic circuits in audio speakers, the restoration of demagnetized finished products, and the elimination of residual magnetism during the production process, Jiuju offers an integrated magnetization and demagnetization process solution that covers magnetic circuit components for speakers of all sizes, including both internal and external magnet types.

Video Case Study on the Magnetization Process for Jiuju Irregular-Shaped Cobalt Magnets—Jiuju Magnetizer

September 12, 2026

Irregularly shaped samarium-cobalt magnets have complex magnetic pole configurations. Combined with the high-temperature resistance and high coercive force of samarium-cobalt materials, this makes them highly prone to issues such as magnetic field non-uniformity and uneven magnetization during magnetization, placing high demands on tooling and process parameters.

Video Case Study on the Magnetization Process for Sintered Neodymium-Iron-Boron Magnetic Rings—Jiuju Magnetizer

September 11, 2026

Sintered neodymium-iron-boron magnetic rings are widely used in precision equipment such as motors and sensors; multipole magnetization imposes stringent requirements on magnetic field uniformity and the positioning accuracy of the magnetic poles.

Video Demonstrating the Magnetization of Jiuju High-Frequency Drivers—Jiuju Magnetizer

September 14, 2026

Problems such as unusual noises during motor operation, reduced power output, and increased energy consumption often stem not from damaged windings or bearings, but from uneven magnetic field distribution.

Video Demonstrating Jiuju's Magnetization Process for Antique Speakers—Jiuju Magnetizer

September 13, 2026

To address the need for rework due to defective magnetic circuits in audio speakers, the restoration of demagnetized finished products, and the elimination of residual magnetism during the production process, Jiuju offers an integrated magnetization and demagnetization process solution that covers magnetic circuit components for speakers of all sizes, including both internal and external magnet types.

Video Case Study on the Magnetization Process for Jiuju Irregular-Shaped Cobalt Magnets—Jiuju Magnetizer

September 12, 2026

Irregularly shaped samarium-cobalt magnets have complex magnetic pole configurations. Combined with the high-temperature resistance and high coercive force of samarium-cobalt materials, this makes them highly prone to issues such as magnetic field non-uniformity and uneven magnetization during magnetization, placing high demands on tooling and process parameters.

Video Case Study on the Magnetization Process for Sintered Neodymium-Iron-Boron Magnetic Rings—Jiuju Magnetizer

September 11, 2026

Sintered neodymium-iron-boron magnetic rings are widely used in precision equipment such as motors and sensors; multipole magnetization imposes stringent requirements on magnetic field uniformity and the positioning accuracy of the magnetic poles.

Video Demonstrating the Magnetization of Jiuju High-Frequency Drivers—Jiuju Magnetizer

September 14, 2026

Problems such as unusual noises during motor operation, reduced power output, and increased energy consumption often stem not from damaged windings or bearings, but from uneven magnetic field distribution.

Video Demonstrating Jiuju's Magnetization Process for Antique Speakers—Jiuju Magnetizer

September 13, 2026

To address the need for rework due to defective magnetic circuits in audio speakers, the restoration of demagnetized finished products, and the elimination of residual magnetism during the production process, Jiuju offers an integrated magnetization and demagnetization process solution that covers magnetic circuit components for speakers of all sizes, including both internal and external magnet types.

Video Case Study on the Magnetization Process for Jiuju Irregular-Shaped Cobalt Magnets—Jiuju Magnetizer

September 12, 2026

Irregularly shaped samarium-cobalt magnets have complex magnetic pole configurations. Combined with the high-temperature resistance and high coercive force of samarium-cobalt materials, this makes them highly prone to issues such as magnetic field non-uniformity and uneven magnetization during magnetization, placing high demands on tooling and process parameters.

Video Case Study on the Magnetization Process for Sintered Neodymium-Iron-Boron Magnetic Rings—Jiuju Magnetizer

September 11, 2026

Sintered neodymium-iron-boron magnetic rings are widely used in precision equipment such as motors and sensors; multipole magnetization imposes stringent requirements on magnetic field uniformity and the positioning accuracy of the magnetic poles.