Full Site Search

Does the motor performance meet expectations? High-quality magnetization equipment is the core guarantee

Frequently Asked Questions 26250

End-to-End Solution for Magnetization Automation

In industrial production and equipment manufacturing scenarios, the performance of motors has a direct impact on the efficiency and service life of products. Poor energy efficiency, fluctuating operation and high energy consumption of motors are mostly related to the technical control of the magnetization process. Industry data shows that the magnetization process is not up to standard, which can easily lead to motor performance does not meet the application requirements, which will increase the average production cost of the enterprise 12%-15%, equipment failure rate 20%. If you want to properly deal with these problems, the selection of professional and reliable magnetization equipment is particularly critical. Relying on its own technical accumulation and practical application results, JiuJu magnetizing equipment has become the preferred product in the industry.

undefined

As the core component of energy conversion, the magnetic strength and uniformity of the permanent magnets inside the motor are directly related to the motor's output power and operational stability. Traditional magnetizing equipment is limited by technical conditions, and is prone to unstable magnetizing voltage and imprecise control of magnetizing time, which leads to uneven magnetization of permanent magnets, resulting in torque fluctuations and abnormal heat generation during the operation of the motor.

In response to this common pain point in the industry, JiuJi magnetizing equipment adopts the cutting-edge pulse magnetizing technology, which can generate high-energy, short-pulse magnetizing currents, allowing permanent magnets to quickly achieve saturation magnetization and effectively guaranteeing an even distribution of magnetic flux.

undefined

The intelligent control system of JiuJi magnetizing equipment also has significant advantages. The system enables precise adjustment and real-time monitoring of parameters, allowing users to personalize the configuration of parameters such as magnetizing voltage, pulse frequency and magnetizing time according to the actual needs of different types of motors. The equipment is equipped with high-precision sensors that can collect data during the magnetization process in real time, and then automatically optimize the magnetization program through algorithms to control the magnetization error within ±1%, effectively improving the consistency and stability of the magnetization quality. In addition, the equipment adopts a modular design, which is compatible with a wide range of specifications from small micro-motors to large industrial motors, and is applicable to a wide range of fields such as home appliances, new energy vehicles, industrial automation, and so on.

undefined

JiuJi's magnetizing equipment has shown remarkable results in practical applications. In the application scenario of a new energy vehicle manufacturer, the introduction of JUJI magnetizing equipment has increased the average output power of the motor by 18%, reduced energy consumption by 15%, and increased the product qualification rate from 90% to 97%. In the home appliance industry, a well-known enterprise has adopted JUJI magnetizing equipment, which has lowered the noise level of the motor by 25%, and has significantly improved its operation stability and reduced the after-sale failure rate of its products by 30%. These practical application data show that JiuJi magnetizing equipment can effectively optimize the performance of motors, help enterprises control production costs and further enhance market competitiveness.

undefined

With the continuous upgrading of motor manufacturing technology, the performance of magnetizing equipment has a direct impact on the final quality of motors. With advanced technology, stable performance and wide applicability, JURONG magnetizers provide reliable support for motors to meet application standards. Whether you are a manufacturer or a maintenance organization, when you choose a JURONG magnetizer, you are choosing an efficient and stable solution for motor performance.

Magnetization of Magnetic Materials
3C Electronic Magnetization
Motor Rotor Magnetization
Car Speaker Magnetization
New Energy Vehicle Industry
Medical Equipment Industry
Jiuju Magnetization 100 Q&A: What Counts as a Defective Magnet

Jiuju Magnetization 100 Q&A: What Counts as a Defective Magnet

Nov 10, 2026

Defects in permanent magnets go beyond appearance: magn…

Magnetization 100 Q&A: Choosing the Magnet Operating Temperature

Magnetization 100 Q&A: Choosing the Magnet Operating Temperature

Nov 10, 2026

Operating temperature is the core constraint in magnet …

Precise Magnetization Control for AlNiCo Magnets: Case Video

Precise Magnetization Control for AlNiCo Magnets: Case Video

Oct 30, 2026

AlNiCo magnets keep stable flux thanks to a very low te…

How NdFeB Magnets Achieve Stable Magnetism: Case Video

How NdFeB Magnets Achieve Stable Magnetism: Case Video

Oct 9, 2026

Stable NdFeB performance requires the right grade, a co…

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

Previous. NEXT STORY.

en_USEnglish