Full Site Search

Magnetic Domain Optimization: Full-Process Demagnetization and Remagnetization Performance Testing for Servo Motors

End-to-End Solution for Magnetization Automation

In the field of industrial automation, servo motor as the core drive components, its performance stability is directly related to equipment efficiency and service life. High temperature, overload and other special working conditions can easily cause demagnetization of the motor magnet, which in turn leads to problems such as reduced speed and increased energy consumption. A batch of servo motors of an enterprise have been in high temperature operation for a long time and have been seriously demagnetized, which requires a professional treatment solution. Relying on more than 10 years of magnetizing technology accumulation, JiuJu Automation customized the "demagnetization - re-magnetization" full-process magnetic field adjustment solution for this enterprise, successfully restoring the magnetic properties of the motor and realizing the adaptation of magnetizing equipment, and the following is the complete record of this project.

undefined

Demagnetization Diagnosis: Pinpointing the Cause of Magnetic Energy Degradation

The customer sent two sizes of servo motor rotors to JiuJi's laboratory and the following data were obtained after Gaussmeter testing:

  • Small motors: 17.6 GS remanent magnetization before magnetization
  • Large motors: 140.2 GS remanent magnetization before magnetization

Through the polarity direction detection, it is found that the uniformity of the magnetic pole distribution of the motor has decreased, and the lack of magnetic flux density directly leads to the weakening of torque output. After analysis, the irreversible demagnetization triggered by the high temperature environment is the main problem, and the magnetic field needs to be adjusted and optimized with the help of high-precision magnetizing technology.

undefinedundefinedundefined

For the customer's batch motor processing needs, JiuJi adopts the combination solution of MA-3050 magnetizer with CS-60 magnetizing coil, whose core technical advantages are as follows:

1.High-voltage energy storage transient discharge:Using 3000V high-voltage capacitor for energy storage, releasing 3000A peak current for the magnetizing coil in microsecond time, the resulting instantaneous magnetic field strength can be up to 5T (Tesla), which is far more than the endowed coercive force (Hcj) of the magnetic material, guaranteeing that the magnetization reaches the saturation state.

2.Dual equipment working in tandem:Mainframe MA-3050: Precise control of voltage, capacitance and discharge timing ensures the stability of the magnetization process;

3. Magnetizing coil CS-60: customized design, can be adapted to different sizes of rotors, magnetic field uniformity error control at <2%.

4.Verification of Faraday's law of electromagnetic induction:The discharge waveforms were monitored by an oscilloscope, confirming that the magnetic field strength was linearly related to the magnetizing energy, and the measured data matched the theoretical model with 99.71 TP3T.

III. Effectiveness verification: magnetic energy density restored to the initial standard

After 3 cycles of magnetizing operation, the magnetic parameters of the motor show significant optimization:

  • Small motors: 1543GS remanent magnetization after magnetization.
  • Large motors: remanent magnetization up to 2301GS after magnetization

The result of the speed test shows that under the rated load condition, the speed fluctuation rate of the motor is optimized from ±8% to ±1.5%, and the torque output is restored to the nominal value of 98%, which can be fully adapted to the customer's actual use in the production scenario.

undefinedundefinedundefined

Optimization: Recommended Economy of MA-3030 Magnetizing System

Based on the actual test data, JiuJi recommends the combination of MA-3030 magnetizer (3000V/3000μF) and CS-60 magnetizing coil, with the following core advantages:

1. Reduced cost and adaptability: Compared with the MA-3050 model, the MA-3030 magnetizer can still reach 4500J of magnetizing energy after optimizing and adjusting the capacitance capacity, which can satisfy the customer's needs for the magnetizing operation of motor models above 90%;

2. Temperature control protection design: it can be used with ice water machine (optional), which can be adapted to high-frequency magnetization operation scenarios and help extend the stable use cycle of the equipment.

undefined

With the MA series intelligent magnetizing system, JiuJi Automation has created a closed-loop solution to regenerate the magnetic energy of industrial motors. In response to the actual problem of high-temperature demagnetization of a customer's batch servo motors (the residual magnetism of small-sized motors was recovered from 17.6Gs to 1543Gs, and that of large-sized motors from 140.2Gs to 2301Gs), JiuJi Automation adopts the high-pressure pulse technology of 3000V/3000μF, and realizes the motor's magnetic performance of 102% by using the combination of the MA-3050 mainframe and the CS-60 coils. Recovery effect.

Compared with the traditional way of replacing motors, this solution can save the costs related to 82%, and at the same time, it provides 3-year warranty service, which has already been formed into a standardized service package (including the MA-3030 basic set and anti-oxidation value-added services). In the future, JiuJu Automation will continue to invest in the research and development of gradient magnetization, intelligent temperature control and other core technologies to help optimize and upgrade the whole life cycle management of manufacturing equipment.

Magnetization of Magnetic Materials
3C Electronic Magnetization
Motor Rotor Magnetization
Car Speaker Magnetization
New Energy Vehicle Industry
Medical Equipment Industry
Jiuju Magnetization 100 Q&A: What Counts as a Defective Magnet

Jiuju Magnetization 100 Q&A: What Counts as a Defective Magnet

Nov 10, 2026

Defects in permanent magnets go beyond appearance: magn…

Magnetization 100 Q&A: Choosing the Magnet Operating Temperature

Magnetization 100 Q&A: Choosing the Magnet Operating Temperature

Nov 10, 2026

Operating temperature is the core constraint in magnet …

Precise Magnetization Control for AlNiCo Magnets: Case Video

Precise Magnetization Control for AlNiCo Magnets: Case Video

Oct 30, 2026

AlNiCo magnets keep stable flux thanks to a very low te…

How NdFeB Magnets Achieve Stable Magnetism: Case Video

How NdFeB Magnets Achieve Stable Magnetism: Case Video

Oct 9, 2026

Stable NdFeB performance requires the right grade, a co…

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

Previous. NEXT STORY.

en_USEnglish