Smart Automation: Paving the Way to Success
Pioneering Industrial Advancement with Intelligent Solutions
Full Site Search
Pioneering Industrial Advancement with Intelligent Solutions
The "Frequently Asked Questions" section for Jiuju magnetizing machines compiles the most common questions raised by customers during the purchasing and usage process. The content covers a wide range of practical topics—including equipment selection, compatible materials, operating environments, operating procedures, daily maintenance, troubleshooting, and customization options—presented in a clear and easy-to-understand manner. It provides comprehensive answers to questions regarding different operational requirements, magnetization process combinations, and equipment application scenarios, helping customers quickly clarify their purchasing decisions and avoid common pitfalls. At the same time, we continuously update the section with industry-specific expertise and practical experience to resolve various basic challenges encountered in daily production. This one-stop resource answers all types of questions, saving customers the time spent on repeated inquiries and helping them easily select the right equipment, use it properly, and efficiently advance their magnetic material magnetization production operations.
轴向磁通电机磁钢铺在盘面,充磁线圈需按投影分区、覆盖气隙,并把线圈温度纳入工艺窗口。
View Full Version在线检测读相对值与趋势,离线磁通测试可溯源标定,两者是分层分工,不能互相替代。
View Full Version充磁一致性不稳多来自来料、能量、检测三处小偏差叠加,需分别量化后再定对策。
View Full Version无重稀土磁材不能按牌号套老参数,应用能量阶梯加磁通平台判据,并验证退磁保持率。
View Full Version驱动头磁隙窄、磁通密度高,偏差控制重点是把波动摁在测量重复性以内:来料控住圆度壁厚,用径向单极充磁保证内外同轴,固定位置测量并做温度补偿。
View Full Version喇叭充磁线产能由充电、放电、上下料与检测四段节拍拼成,真正占时间的是储能电容充电;多工位能并行,但最慢一站决定整线产出。
View Full Version装配后整体充磁可避开带磁装配的吸附与崩角,磁化方向由转子机械基准保证,代价是电源能量和工装同轴度要求更高。
View Full Version线圈没有统一保质期,寿命按累计放电次数算。温升与绝缘等级、放电峰值、电磁力机械变形、灌封防潮四项决定寿命,温升最易被忽视。
View Full Version能,但要分清能退和退得干净。脉冲电源加反向放电可做退磁;要让残余磁通近零,须一串幅值递减的交变脉冲,而非一次反向。
View Full Version饱和度是区间而非开关。材料、峰值场强与作用时间、方向一致性、几何与自退磁、温度、回路工装、后续工序七项共同决定磁体是否真正充饱。
View Full Version