Full Site Search

【久巨充磁行业新闻】2025 磁性材料元件进出口:韧性结构双优表现

End-to-End Solution for Magnetization Automation

As an important part of the electronic information industry, the international trade status of magnetic material components often reflects the industry's development vitality and performance in the global market. Recently, the industry association released import and export data for the first ten months of 2025. Although the overall trade environment is facing some challenges, there are still a lot of positive signals in the segmented areas, and the trade structure is being optimized, showing that this industry still maintains a good development resilience amidst the adjustment.

From the overall data point of view, from January to October 2025, the total import and export trade of magnetic material components reached 3.896 billion U.S. dollars, compared with the same period of last year, down 9.39%. trade surplus was 2.997 billion U.S. dollars, the scale remained relatively stable.

On the export side, the export volume of the whole category of products was 247,800 tons and the export value was 3.446 billion U.S. dollars, a year-on-year decline of 5.31% and 9.38%. The import side was more obviously affected by the changes in demand, with an import volume of 858.27 tons and an import value of 449 million U.S. dollars, a year-on-year decline of 22.87% and 9.47%, which reflects that the industry is going through the adjustment process of the supply and demand pattern. This reflects that the industry is going through the adjustment process of supply and demand pattern.

undefined

In the segmented products, some products with advantages performed relatively stable. Rare earth permanent magnets exported 45,300 tons, amounting to 2.154 billion U.S. dollars, accounting for 62.5% of the export value of the whole category, with a trade surplus of 2.068 billion U.S. dollars. Though slightly down year-on-year, they still occupy an important position in the product structure.

NdFeB related products showed a differentiated situation. The export volume and price of magnetic powder increased by 16.20% and 15.95% year-on-year respectively, while the import volume increased significantly by 119.95%, which shows that the market demand for high-end raw materials is relatively strong. Superconducting screws and MRI with electromagnets and other products, the export value of growth of 4.51%, trade surplus growth of 19.33%, to become a small number of positive growth in total imports and exports of product categories.

undefined

The structure of trade partners is also continuously optimized. In terms of exports, Germany (14.1%), the United States (9.7%), Japan (9.7%) is the main destination, the Asian market as a whole accounted for more than 30%, at the same time, India, Mexico and other emerging markets are also expanding steadily. Imports mainly from Japan (23.5%), Germany (18.2%) and other countries and regions, imports of products with higher technological content of the products, reflecting the domestic demand for supplementation in the field of high-end still.

Despite some pressure in the short term, the basic advantages of the magnetic material components industry still exist, and the development trend of high-end product structure and market diversification is obvious. With the continuous expansion of new energy vehicles, energy storage and other downstream applications, as well as the continued promotion of industrial transformation and upgrading, the industry is expected to cope with the current challenges by optimizing the product structure, expanding the diversified market, and further enhance its position in the global market.

Magnetization of Magnetic Materials
3C Electronic Magnetization
Motor Rotor Magnetization
Car Speaker Magnetization
New Energy Vehicle Industry
Medical Equipment Industry
Jiuju Magnetization 100 Q&A: What Counts as a Defective Magnet

Jiuju Magnetization 100 Q&A: What Counts as a Defective Magnet

Nov 10, 2026

Defects in permanent magnets go beyond appearance: magn…

Magnetization 100 Q&A: Choosing the Magnet Operating Temperature

Magnetization 100 Q&A: Choosing the Magnet Operating Temperature

Nov 10, 2026

Operating temperature is the core constraint in magnet …

Precise Magnetization Control for AlNiCo Magnets: Case Video

Precise Magnetization Control for AlNiCo Magnets: Case Video

Oct 30, 2026

AlNiCo magnets keep stable flux thanks to a very low te…

How NdFeB Magnets Achieve Stable Magnetism: Case Video

How NdFeB Magnets Achieve Stable Magnetism: Case Video

Oct 9, 2026

Stable NdFeB performance requires the right grade, a co…

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

Previous. NEXT STORY.

en_USEnglish