Full Site Search

NdFeB Magnetic Powder & Silicone Magnetization Case Study

End-to-End Solution for Magnetization Automation

 Jiuju AutomationReceived a task from an institution about the application of NdFeB magnetic powder mixed with silica gel for magnetization case testing, this project not only tests the company's technical strength, but also highlights its professionalism and innovation ability in the field of magnetic material magnetization.

       With the continuous progress of science and technology, magnetic materials are increasingly widely used in various fields. NdFeB magnetic powder, as a high-performance permanent magnetic material, is favored for its high magnetic energy product, high coercivity and good temperature stability. Silicone, on the other hand, is widely used in a variety of industrial products due to its excellent weather resistance, insulation and plasticity. When NdFeB magnetic powder is mixed with silica gel, composite materials with specific magnetic properties can be prepared through magnetization treatment to meet the needs of use in various complex environments.

undefined

After receiving the task, JiuJi Automation quickly set up a professional test team and made a detailed test plan. First, the team carefully checked and analyzed the samples provided by the customer to ensure that the samples met the test requirements. Subsequently, according to the characteristics of the samples and the customer's testing needs, the team chose the appropriateMagnetizing Equipmentand test instruments.

undefined

This test utilizes theMagnetizing EquipmentIt is a 3000V high power magnetizer independently developed by JiuJu Automation, which is characterized by instant magnetization in a strong magnetic field, rapid saturation magnetization, and is capable of quantitative magnetization and flexible operation. At the same time, in order to more accurately measure the magnetic properties of the samples, the team is equipped with high-precision Gauss meters and other testing instruments.

undefined

During the testing process, JiuJi Automation's testing team strictly followed the testing program. First, the NdFeB magnetic powder mixed with silica gel sample was placed in the magnetizing coil and the voltage of the magnetizer was adjusted to the appropriate value. Subsequently, the magnetizer is activated to carry out the magnetization process so that the sample reaches the saturation magnetization state in a short period of time. After the magnetization was completed, the magnetic properties of the samples were measured using a Gaussmeter and the relevant data were recorded.

undefined

In order to have a more comprehensive understanding of the magnetic performance of the samples, the test team also designed several samples with different magnetic powder contents for testing. By comparing the magnetization effect of samples with different magnetic powder contents, the team found that the higher the magnetic powder content, the stronger the magnetic field strength of the samples. This finding provides an important reference for the customer's subsequent product development.

undefined

The success of this magnetization case test not only verifies the professional ability of JiuJi in the field of magnetic material magnetization, but also provides strong support for the customer's subsequent product development and market promotion. Through this cooperation, JiuJu and the customer have established a closer relationship, and the two sides will carry out more in-depth cooperation and communication in the field of magnetic material composite applications.

undefined

Future.Kuju CorporationWe will continue to adhere to the service concept of "professional, innovative and efficient", and are committed to providing customers around the world with better magnetic material magnetization solutions. At the same time, the company will continue to explore new technologies and processes to promote the innovative development of magnetic material composite applications, and contribute more to the progress of science and technology and social development.

Magnetization of Magnetic Materials
3C Electronic Magnetization
Motor Rotor Magnetization
Car Speaker Magnetization
New Energy Vehicle Industry
Medical Equipment Industry
Jiuju Magnetization 100 Q&A: What Counts as a Defective Magnet

Jiuju Magnetization 100 Q&A: What Counts as a Defective Magnet

Nov 10, 2026

Defects in permanent magnets go beyond appearance: magn…

Magnetization 100 Q&A: Choosing the Magnet Operating Temperature

Magnetization 100 Q&A: Choosing the Magnet Operating Temperature

Nov 10, 2026

Operating temperature is the core constraint in magnet …

Precise Magnetization Control for AlNiCo Magnets: Case Video

Precise Magnetization Control for AlNiCo Magnets: Case Video

Oct 30, 2026

AlNiCo magnets keep stable flux thanks to a very low te…

How NdFeB Magnets Achieve Stable Magnetism: Case Video

How NdFeB Magnets Achieve Stable Magnetism: Case Video

Oct 9, 2026

Stable NdFeB performance requires the right grade, a co…

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

轴向磁通电机多极充磁难点在哪?久巨工艺解答

轴向磁通电机多极充磁难点在哪?久巨工艺解答

Nov 19, 2026

轴向磁通电机磁钢铺在盘面、磁场垂直盘面、极数又多,难点集中在磁路方向、极间对位与热变形。说明专用轴向极头、角度定位销与多点扫描验收的做法。

电机充磁后转矩脉动大如何解决?久巨工艺解析

电机充磁后转矩脉动大如何解决?久巨工艺解析

Nov 19, 2026

转矩脉动大要先分清是电磁设计的齿槽转矩还是制造一致性的极间不均。用反电动势与逐极表磁定位,再从极头对位、能量闭环、磁通分组与斜极设计协同改善。

久巨人形机器人关节磁钢怎么保证充磁一致性?

久巨人形机器人关节磁钢怎么保证充磁一致性?

Nov 19, 2026

关节磁钢小、薄、极数多,难点不在能不能充上,而在每一件每一极都一样。分三层管控一致性,用仿形胎具解决薄壁定位,能量闭环全检后按磁通分组配对。

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

扬声器喇叭充磁后音质差异大怎么办?久巨电声行业答疑

Nov 19, 2026

同一批喇叭充完磁听感不一致,问题常在磁隙磁通而非装配。说明磁通偏低与不均如何影响灵敏度、失真与谐波,以及充磁端四个来源、稳定化处理与分档配对。

NEXT STORY.

en_USEnglish